Fearless Media Co. Box Logo Decal

from $5.00

Built for the glass, the toolbox, or the track car.

Cut from premium, weather-resistant vinyl, these stickers are engineered to handle high speeds, tire smoke, and outdoor abuse without peeling or fading. Whether you're repping the brand on your quarter window, bumper, or garage fridge, these clean slaps are made to last. All stickers ship with high-tack protective transfer tape ready for a flawless install.

Specifications

  • Sizes Available: 4.5” x 1.16” or 9” x 2.33”

  • Material: Premium Water-Resistant, Safe & Non-Toxic Vinyl

  • Finish: High-visibility precision cut

Installation Guide (Read Before You Stick)

Stickers adhere best to flat, smooth surfaces. Highly textured plastics or rough surfaces may cause poor adhesion.

  1. Prep the Surface: Make sure the application area is 100% clean, dry, and completely free of dust, grease, or garage debris. (Tip: A quick wipe down with rubbing alcohol works wonders).

  2. Peel the Backing: Slowly peel the paper backing away from the sticker. The vinyl design should stay firmly attached to the clear transfer tape.

  3. Line it Up: Carefully place the sticker and transfer tape onto your desired surface.

  4. Smooth it Out: Grab a credit card or squeegee and firmly smooth out the sticker. Always work from the dead center of the design outward to push out any air bubbles.

  5. Remove the Tape: Slowly peel back the transfer tape at a sharp angle. If the vinyl starts lifting up with the tape, stop, lay it back down, repeat Step 4, and try again.

  6. Send It: Admire the fresh look of your new Fearless Media Co. gear.

Size:
Color:

Built for the glass, the toolbox, or the track car.

Cut from premium, weather-resistant vinyl, these stickers are engineered to handle high speeds, tire smoke, and outdoor abuse without peeling or fading. Whether you're repping the brand on your quarter window, bumper, or garage fridge, these clean slaps are made to last. All stickers ship with high-tack protective transfer tape ready for a flawless install.

Specifications

  • Sizes Available: 4.5” x 1.16” or 9” x 2.33”

  • Material: Premium Water-Resistant, Safe & Non-Toxic Vinyl

  • Finish: High-visibility precision cut

Installation Guide (Read Before You Stick)

Stickers adhere best to flat, smooth surfaces. Highly textured plastics or rough surfaces may cause poor adhesion.

  1. Prep the Surface: Make sure the application area is 100% clean, dry, and completely free of dust, grease, or garage debris. (Tip: A quick wipe down with rubbing alcohol works wonders).

  2. Peel the Backing: Slowly peel the paper backing away from the sticker. The vinyl design should stay firmly attached to the clear transfer tape.

  3. Line it Up: Carefully place the sticker and transfer tape onto your desired surface.

  4. Smooth it Out: Grab a credit card or squeegee and firmly smooth out the sticker. Always work from the dead center of the design outward to push out any air bubbles.

  5. Remove the Tape: Slowly peel back the transfer tape at a sharp angle. If the vinyl starts lifting up with the tape, stop, lay it back down, repeat Step 4, and try again.

  6. Send It: Admire the fresh look of your new Fearless Media Co. gear.